Banyak sekali perintah yang telah sediakan oleh Cisco System. Kita membutuhkan lebih dari sepuluh ribu halaman kertas A4 untuk mengeprintnya. Kali ini saya akan memcoba perintah yang sering digunakan saja.
Switch>
Switch>
Switch>
Switch>show clock
*0:7:36.280 UTC Mon Mar 1 1993
Switch>
Switch>
Switch>
Switch>show version
Cisco Internetwork Operating System Software
IOS ™ C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA4, RELEASE SOFTWARE(fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Wed 18-May-05 22:31 by jharirba
Image text-base: 0x80010000, data-base: 0x80562000
ROM: Bootstrap program is is C2950 boot loader
Switch uptime is 7 minutes, 56 seconds
System returned to ROM by power-on
Cisco WS-C2950T-24 (RC32300) processor (revision C0) with 21039K bytes of memory.
Processor board ID FHK0610Z0WC
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
63488K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 0005.5ED5.684E
Motherboard assembly number: 73-5781-09
Power supply part number: 34-0965-01
Motherboard serial number: FOC061004SZ
Power supply serial number: DAB0609127D
Model revision number: C0
Motherboard revision number: A0
Model number: WS-C2950T-24
System serial number: FHK0610Z0WC
Configuration register is 0xF
Switch>
Switch>
Switch>
Switch>show history
show
show interface
show interface fa0/1
sh int fa0/1
sh int f0/1
show cdp
show terminal
show clock
show version
show history
Switch>
Switch>
Switch>
Switch>?
Exec commands:
<1-99> Session number to resume
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
logout Exit from the EXEC
ping Send echo messages
resume Resume an active network connection
show Show running system information
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
Switch>
Switch>
Switch>
Switch>show ?
arp Arp table
cdp CDP information
clock Display the system clock
crypto Encryption module
dtp DTP information
etherchannel EtherChannel information
flash: display information about flash: file system
history Display the session command history
interfaces Interface status and configuration
ip IP information
ipv6 IPv6 information
mac MAC configuration
mac-address-table MAC forwarding table
mls Show MultiLayer Switching information
privilege Show current privilege level
sessions Information about Telnet connections
ssh Status of SSH server connections
tcp Status of TCP connections
terminal Display terminal configuration parameters
users Display information about terminal lines
version System hardware and software status
vlan VTP VLAN status
vtp VTP information
Switch>
Switch>
Switch>
